Using manual versus mechanized glide path instruments and ProTaper Gold versus ProTaper Next systems in curved canals: micro-CT study

Abstract The aim of this study was to evaluate the root canal shaping effect of ProTaper Gold (PTG) versus ProTaper Next (PTN) instrumentation systems, and of a manual #15 K-type file (K15) versus the ProGlider (PG) mechanized instrument for glide path creation, in severely curved mesial canals. Twenty-four mandibular molars with two separate mesial canals were anatomically matched using computed tomographic scanning, and then divided into two groups (n=12) according to the glide path instrument used, either K15 or PG. In all teeth, the PTG system was used to prepare the mesiobuccal canal, and the PTN, the mesiolingual canal. The teeth were scanned by computed microtomography, before and after root canal preparation, and the values of the initial volume, final volume, volumetric variation, untouched walls, and canal transportation variables were determined. The data were analyzed using the two-way ANOVA test, and the Tukey test for multiple comparisons. There was no significant difference among the study groups regarding volumetric variation or root canal transportation, either in the cervical, middle or apical thirds, or in the entire root canal (p>0.05). In the apical third, the percentage of untouched walls was significantly higher in groups using K15 than in those using PG (p<0.05), namely 33.144% and 23.285%, respectively, irrespective of the instrumentation system. In the other regions, there was no difference between K15 and PG regarding this variable. It was concluded that PG was associated with a lower rate of untouched walls in the apical region than K15.

Influence of genetic polymorphisms on oral health-related quality of life after root canal treatment

Abstract To evaluate the impact of genetic polymorphisms in interleukins (IL1A rs17561, rs1304037; IL10 rs1800871; IL1RN rs9005), nitric oxide (NOS2 rs2779249, rs2897518) and suppressor of cytokine signaling (SOCS1 rs243327, rs33977706) on oral health-related quality of life (OHRQoL) of patients under-going root canal treatment (RCT). Methods: The sample consisted of 108 participants, presenting single-rooted teeth with asymptomatic periapical periodontitis. The impact of the OHRQoL was recorded using the Oral Health Impact Profile (OHIP-14) before, seven, and 30 days after RCT. Saliva samples were collected as a source of genomic DNA. Genetic polymorphisms were genotyped by Real-Time PCR using the Taqman method. Univariate and Multivariate analyses were used (p<0.05). Results: A significant difference was observed for the polymorphism rs2297518 in the NOS2 gene in functional limitation in the codominant (p=0.037) and recessive (p=0.001) models; in the physical pain (p<0.001 in both models); in psychological discomfort (p<0.001 in both models); in physical disability (p<0.001 in both models) and in psychological disability (p<0.001 in both models). Polymorphisms in the SOCS1 gene, in the recessive model, rs33977706 (p=0.045) and rs243327 (p=0.019), influenced the OHRQoL in the psychological discomfort domain. Conclusions: Polymorphisms in NOS2 and SOCS1 genes influenced the OHRQoL of patients undergoing RCT.

Resumo Avaliar o impacto de polimorfismos genéticos em interleucinas (IL1A rs17561, rs1304037; IL10 rs1800871; IL1RN rs9005), óxido nítrico (NOS2 rs2779249, rs2897518) e supressor da sinalização de citocinas (SOCS1 rs243327, rs33977706) na qualidade de vida relacionada à saúde bucal (QVRSB) de pacientes submetidos a tratamento endodôntico (TE). Métodos: A amostra foi composta por 108 participantes, que apresentavam dentes unirradiculares com lesão periapical assintomática. O impacto da QVRSB foi registrado usando o Oral Health Impact Profile (OHIP-14) antes, sete e 30 dias após o TE. Amostras de saliva foram coletadas como fonte de DNA genômico. Os polimorfismos genéticos foram genotipados por PCR em tempo real usando o método Taqman. Análises univariadas e multivariadas foram utilizadas (p<0,05). Resultados: Observou-se diferença significativa para o polimorfismo rs2297518 no gene NOS2 na limitação funcional nos modelos codominante (p=0,037) e recessivo (p=0,001); na dor física (p<0,001 em ambos os modelos); no desconforto psicológico (p<0,001 em ambos os modelos); na deficiência física (p<0,001 em ambos os modelos) e na deficiência psicológica (p<0,001 em ambos os modelos). Polimorfismos no gene SOCS1, no modelo recessivo, rs33977706 (p=0,045) e rs243327 (p=0,019), influenciaram a QVRSB no domínio desconforto psicológico. Conclusões: Polimorfismos nos genes NOS2 e SOCS1 influenciaram a QVRSB de pacientes submetidos a TE.

Unprepared areas and centralization of oval canals prepared with WaveOne Gold or XP-endo Shaper: microcomputed tomographic analyses / Areas não preparadas e centralização de canais ovais preparados com WaveOne Gold ou XP-endo Shaper: análises tomográficas microcomputadorizadas

ABSTRACT Current instrumentation systems cannot fully prepare oval root canal systems. This may cause accumulation of hard tissue debris and fail to eliminate bacteria from areas inaccessible to instrumentation, which could perpetuate periapical inflammation and jeopardize the success of endodontic treatment Aim To evaluate the performance of two endodontic systems in oval canals by investigating the changes in volume, unprepared areas, and centering ability of XP-endo Shaper (XPS) and WaveOne Gold (WOG) in oval canals using microcomputed tomography (micro-CT) Materials and Method Thirty mandibular canines were scanned before and after preparation with WOG (25/.07 and 35/.06) or XPS (30/.01) to evaluate the volume, surface area, and canal centralization at 4 mm and 10 mm from the apical foramen Results Volume and surface area increased significantly after preparation with both systems (p<0.05). However, no significant difference was observed in the unprepared areas, regarding either the entire canal (26.21% for WOG and 30.10% for XPS), or the apical segment (18.82% for WOG and 14.63% for XPS) (p >0.05) Conclusions Both systems maintained canal centralization, with no difference between them. XPS and WOG had similar shaping abilities in the mandibular canine, but left almost one third of the unprepared areas.

RESUMO Os sistemas de instrumentação atuais são incapazes de preparar completamente os sistemas de canais radiculares do canal oval, o que pode levar ao acúmulo de detritos de tecido duro e manter micro-organismos em áreas inacessíveis à instrumentação. Essas bactérias poderiam perpetuar a inflamação periapical e comprometer o sucesso do tratamento endodôntico Objetivo Para avaliar o comportamento de dois sistemas endodônticos em canais ovais, esse estudo investigou as alterações no volume, áreas não preparadas e capacidade de centralização do XP-endo Shaper (XPS) e do WaveOne Gold (WOG) em canais ovais usando microtomografia computadorizada (micro-CT) Material e métodos Trinta caninos inferiores foram escaneados antes e depois do preparo com WOG (25/.07 e 35/.06) ou XPS (30/.01) para avaliar o volume, a área de superfície e a centralização do canal a 4 mm e 10 mm do forame apical Resultados O volume e a área de superfície aumentaram significativamente após o preparo com ambos os sistemas (p<0,05). No entanto, não foram observadas diferenças significativas nas áreas não preparadas, não apenas em todo o canal (26,21% para WOG e 30,10% para XPS), mas também no segmento apical (18,82% para WOG e 14,63% para XPS) (p >0,05) Conclusão Ambos os sistemas mantiveram a centralização do canal, sem diferenças entre eles. O XPS e o WOG tiveram habilidades de modelagem semelhantes no canino mandibular, mas deixaram quase um terço das áreas do canal sem preparo.

Bypass de instrumento endodôntico fraturado: relato de caso / Bypass of a fractured endodontic instrument: case report

Introdução: Mesmo com toda evolução tecnológica desses instrumentos, com o desenvolvimento das limas de liga de níquel-titanio (NiTi) e sistemas mecanizados, as fraturas podem ocorrer durante o preparo químico/mecânico. Existem três abordagens mais regulamente aplicadas para solucionar essa intercorrencia: tentativa de remoção do instrumento com ultrassom, tentativa de ultrapassálo (bypass) ou a obturação do segmento. Objetivo: Relatar um caso da técnica de bypass em instrumento fraturado no canal radicular. Descrição do caso: Paciente, sexo feminino, 47 anos, brasileira, sem condições sistêmicas associadas, foi encaminhada à clínica do Curso de Odontologia da UNIFENAS, Divinópolis, Minas Gerais, Brasil, para resolução de fratura de instrumento no canal mésio- vestibular do primeiro molar superior direito (16). Optou-se pelo tratamento pela técnica de bypass, que envolveu as seguintes etapas: anestesia, abertura, utilização de lima C-Pilot #08 para ultrapassar o instrumento fraturado, odontometria, escalonamento regressivo a partir da lima k#20, desinfecção com hipoclorito de sódio 5%, medicação com hidróxido de cálcio por 21 dias, agitação da substância irrigadora e obturação dos canais radiculares. Conclusão: O bypass ao instrumento é uma técnica conservadora, eficaz e uma solução adequada em casos de fratura de limas endodônticas dentro dos canais radiculares. Essa técnica visa preservar o máximo possível da estrutura dental original, evitando procedimentos mais invasivos.(AU)

Introduction: Even with all technological evolution of these instruments, with the development of nickel-titanium alloy (NiTi) files and mechanized systems, fractures can occur during chemical/mechanical preparation. There are three most commonly applie to resolve this complication: attempting to remove the instrument with ultrasound, attempting to bypass it, or obturating the segment. Objective: To report a case of bypass technique in fractured instrument in the root canal. Case description: A 47-year-old female patient from Brazil, with no associated systemic conditions, was referred to the clinic of the Dentistry Course at UNIFENAS, Divinópolis, Minas Gerais, Brazil, for resolution of an instrument fracture in the mesio-vestibular canal of the right upper first molar (16). Treatment was performed using the bypass technique, which involved the following steps: anesthesia, opening, use of a C-Pilot #08 file to bypass the fractured instrument, odontometry, regressive scaling from the k#20 file, disinfection with 5% sodium hypochlorite, medication with calcium hydroxide for 21 days, agitation of the irrigating substance and root canal filling. Conclusion: Instrument bypass is a conservative, effective technique and an adequate solution in cases of endodontic file fracture within root canals. This technique aims to preserve as much of the original tooth structure as possible, avoiding more invasive procedures.(AU)

Effect of voxel size of Micro-CT on the assessment of root canal preparation

The aim of this study was to assess the influence of micro-computed tomography (micro-CT) voxel size on evaluation of root canal preparation using rotary heat-treated nickel-titanium files. Curved mesial root canals of mandibular molars were prepared using ProDesign Logic 30/.05 (PDL) or HyFlex EDM 25/.08 (HEDM) (n=12). The specimens were scanned using micro-CT with 5μm of voxel size before and after root canal preparation. Images with sub-resolution of 10 and 20μm voxel sizes were obtained. The percentage of volume increase, debris and uninstrumented root canal surface were analyzed in the different voxel sizes. Data were compared using unpaired Student's t-test and ANOVA statistical tests (α=0.05). No differences were observed for percentage of volume increase, debris and instrumented surface between the root canals prepared by PDL and HEDM (p>0.05). Both systems promoted higher percentage of debris in the apical third compared to the middle third (p0.05). PDL and HEDM had similar root canal preparation capacity. Micro-CT images using different voxel sizes did not influence the results of volume increase and debris evaluation. However, images at 5µm showed greater accuracy to evaluate the percentage of uninstrumented surfaces.

El objetivo de este estudio fue evaluar la influencia del tamaño de vóxel de la microtomografía computarizada (micro-CT) en la evaluación de la preparación del conducto radicular utilizando limas rotatorias de níquel-titanio tratadas térmicamente. Se prepararon conductos radiculares mesiales curvos de molares mandibulares usando ProDesign Logic 30/.05 (PDL) o HyFlex EDM 25/.08 (HEDM) (n=12). Las muestras se escanearon usando micro-CT con un tamaño de vóxel de 5μm antes y después de la preparación del conducto radicular. Se obtuvieron imágenes con subresolución de vóxeles de 10 y 20μm. Se analizó el porcentaje de aumento de volumen, residuos y superficie del conducto radicular no instrumentado en diferentes tamaños de vóxel. Los datos se compararon usando la prueba t de Student no pareada y las pruebas estadísticas ANOVA (α=0,05). No se observaron diferencias en el porcentaje de aumento de volumen, detritus y superficie instrumentada entre los conductos radiculares preparados por PDL y HEDM (p>0,05). Ambos sistemas promovieron un mayor porcentaje de detritos en el tercio apical en comparación con el tercio medio (p0,05). PDL y HEDM tenían una capacidad de preparación del conducto radicular similar. Las imágenes de micro-CT que utilizan diferentes tamaños de vóxel no influyeron en los resultados de la evaluación del volumen y los desechos. Sin embargo, las imágenes de 5µm mostraron una mayor precisión al evaluar el porcentaje de superficies no instrumentadas.

Effect of different disinfection protocols in bacterial viability of an intraradicular biofilm formed in situ

Abstract The present study aimed to evaluate bacterial viability after the use of different disinfection protocols in root canals infected with a multispecies biofilm (MB) formed in situ. Palatal roots with a single canal were obtained from extracted maxillary molars and sterilized before being inserted into the mouth. The roots were contaminated with a MB in an intraoral appliance worn by ten volunteers. All volunteers wore six roots simultaneously in two intraoral devices for 21 days. One root from each volunteer was assigned to each group (n=10): PUI - passive ultrasonic irrigation; EC - Easy Clean; XPF - XP-endo Finisher; aPDT - antimicrobial photodynamic therapy; CI - conventional irrigation; and NC - negative control. The samples were evaluated under confocal laser scanning microscopy. The percentage of viable cells (VC) was calculated over the total percentage of MB biovolume. Data were statistically analyzed (α=5%). The cell viability in the entire root canal or for each third was compared between groups (Kruskal-Wallis test, Dunn post-hoc test) and for the same group (Friedman test, Dunn post-hoc test). Disinfection protocols were not significantly different from each other (P>.05). Samples in EC, PUI, and aPDT had lower cell viability than in NC (P<.05). In the coronal third of samples in the EC, XPF, PUI and aPDT, the percentage of VC biovolume was lower than in the NC (P<.05). The percentage of VC in EC samples was lower in the coronal and middle thirds than in the apical third (P<.05). EC, PUI and aPDT had significant effects on cell viability in intraradicular multispecies biofilm formed in situ when compared with untreated samples.

Resumo O presente estudo teve como objetivo avaliar a viabilidade bacteriana após o uso de diferentes protocolos de desinfecção em canais radiculares infectados com um biofilme multiespécies (MB) formado in situ. Raízes palatinas com canal único foram obtidas de molares superiores extraídos e esterilizadas antes de serem inseridas na boca. As raízes foram contaminadas com MB em um aparelho intraoral usado por dez voluntários. Todos os voluntários usaram seis raízes simultaneamente em dois dispositivos intrabucais por 21 dias. Uma raiz de cada voluntário foi atribuída a cada grupo (n=10): PUI - irrigação ultrassônica passiva; EC - Easy clean; XPF - XP-endo Finisher; aPDT - terapia fotodinâmica antimicrobiana; IC - irrigação convencional; e, NC - controle negativo. As amostras foram avaliadas em microscopia confocal de varredura a laser. A porcentagem de células viáveis (VC) foi calculada sobre a porcentagem total do biovolume de MB. Os dados foram analisados estatisticamente (α=5%). A viabilidade celular em todo o canal radicular ou em cada terço foi comparada entre os grupos (teste de Kruskal-Wallis, teste post-hoc de Dunn) e no mesmo grupo (teste de Friedman, teste post-hoc de Dunn). Os protocolos de desinfecção não foram significativamente diferentes entre si (P>0,05). Amostras dos grupos EC, PUI e aPDT apresentaram menor viabilidade celular do as do NC (P<0,05). No terço cervical das amostras do EC, XPF, PUI e aPDT, a porcentagem de biovolume de VC foi menor do que no NC (P<0,05). A porcentagem de VC nas amostras do EC foi menor nos terços cervical e médio do que no terço apical (P<0,05). EC, PUI e aPDT tiveram efeitos significativos na viabilidade celular do biofilme multiespécies intrarradicular formado in situ quando comparado com amostras não tratadas. Estudos clínicos devem investigar o papel da redução de cargas bacterianas viáveis no sistema de canais radiculares para o sucesso do tratamento endodôntico.

Optimization of automated preparation of long oval-shaped root canals using supplementary instrumentation

Abstract This study compared the preparation of long oval-shaped root canals using WaveOne Gold and XP-endo Shaper systems, both supplemented or not with manual instrumentation. Twenty-four long oval-shaped canals of mandibular incisors were distributed into two groups according to the instrumentation: WaveOne Gold Primary or XP-endo Shaper systems. All root canals were manually instrumented with a size 25 K-file after automated preparation. The specimens were scanned by using a micro-CT device (17.42 µm) before and after automated preparation and manual instrumentation. The increased surface of the root canal and the percentage of untouched areas were assessed. Both WaveOne Gold and XP-endo Shaper systems increased the root canal surface and had similar untouched areas (p>0.05). Supplementary instrumentation increased the surface of the root canal and decreased the untouched walls (p<0.05). WaveOne Gold and XP-endo Shaper systems provided a similar preparation of long oval-shaped canals and manual instrumentation improved their preparation.

Resumo Este estudo comparou o preparo de canais radiculares ovais longos usando os sistemas WaveOne Gold e XP-endo Shaper, ambos complementados ou não com instrumentação manual. Vinte e quatro canais longos e ovais de incisivos inferiores foram distribuídos em dois grupos de acordo com a instrumentação: sistemas WaveOne Gold Primary ou XP-endo Shaper. Todos os canais foram instrumentados manualmente com uma lima K tamanho 25 após preparo automatizado. Os espécimes foram escaneados usando um dispositivo de micro-CT (17,42 µm) antes e após o preparo automatizado e instrumentação manual. O aumento de superfície do canal radicular e a porcentagem de áreas intocadas foram avaliadas. Ambos os sistemas WaveOne Gold e XP-endo Shaper aumentaram a superfície do canal radicular e apresentaram áreas intocadas semelhantes (p>0,05). A instrumentação complementar aumentou a superfície do canal radicular e diminuiu o percentual de áreas intocadas (p <0,05). Os sistemas WaveOne Gold e XP-endo Shaper tiveram o preparo de canais ovais longos semelhantes, e a instrumentação manual melhorou o preparo.

Effect of glide path instruments in cyclic fatigue resistance of reciprocating instruments after three uses

Abstract The present study aims to evaluate the effect of different glide path instruments on the cyclic fatigue resistance of reciprocating endodontic instruments after three uses in mandibular molars. Eighteen Wave One Gold Primary reciprocating instruments were selected and randomly divided into three groups according to the glide path instrument: G1 - manual file K #15, G2 - Wave One Glider reciprocating instrument, and G3 (control group) - glide path was not performed. The reciprocating instruments were tested on mandibular molars and subdivided into three other groups: a new instrument, an instrument with a previous single-use, and an instrument with two previous uses. After the endodontic instrumentation, the instruments were subjected to the cyclic fatigue resistance test using an appropriate tool. The data were submitted to the Shapiro-Wilk test, and subsequently the Kruskal-Wallis test with a significance level of 5%. The results showed no statistical difference between the groups. Thus, it was concluded that the creation of a glide path did not affect the cyclic fatigue resistance of the reciprocating instrument. In addition, the reuse of final preparation instruments up to two times proved to be safe since no fractures were observed in the tested instruments.

Resumo O objetivo do presente estudo foi avaliar a relação de diferentes instrumentos de glide path na resistência à fadiga cíclica de instrumentos endodônticos reciprocantes de preparo final após três utilizações em molares inferiores. Foram selecionados 18 instrumentos reciprocantes Wave One Gold Primary e divididos de maneira randomizada em três grupos: G1 - glide path utilizado foi uma lima manual K #15, G2 - glide path utilizado foi um instrumento reciprocante Wave One Glider, e G3 (controle) - sem utilização de glide path. Os instrumentos foram testados em molares inferiores e subdivididos em outros três grupos: instrumento novo, instrumento com um uso prévio e instrumento com dois usos prévios. Após os testes, os instrumentos foram submetidos ao teste de resistência à fadiga cíclica por meio de uma ferramenta própria para esse uso. Os dados encontrados foram submetidos ao teste de Shapiro-Wilk para avaliar a normalidade na distribuição da amostra, e posteriormente ao teste de Kruskal-Wallis com nível de significância de 5%. Os resultados demonstraram não haver diferença estatística entre os grupos testados. Com isso, concluiu-se que a criação de um glide path não possuiu efeito na resistência à fadiga cíclica do instrumento reciprocante de preparo final. O instrumento reciprocante de preparo final foi utilizado, e posteriormente reutilizado de maneira segura em três dentes posteriores, visto a não ocorrência de fratura em nenhum dos grupos testados.

Effect of contracted endodontic access cavity and root canal preparation by One Curve on danger zone of mesial root canal in mandibular first molars / 口腔疾病防治

Objective @#To explore the influence of a contracted endodontic access cavity on the risk of canal transportation in the danger zone of the mesial root canal of mandibular first molars (MFMs) using a one-curve preparation system, and to provide an experimental basis for the clinical selection of a better pulp approach.@*Methods@#Twenty MFMs extracted for severe periodontal disease that met the inclusion criteria, including intact coronal roots, mesial roots with two separate root canals, mesiobuccal canal (MB) and mesiolingual canal (ML), and a curvature of 0° to 20°, were selected. Subsequently, these MFMs were randomly divided into two groups based on the endodontic access design, including the traditional endodontic access cavity (TEC) group and the contracted endodontic access cavity (CEC) group. In the TEC group, the pulp chamber roof of the tooth was completely removed, while in the CEC group, the pulp chamber roof and peri-cervical dentin were preserved as much as possible. Then, the One Curve single file was adopted to conduct root canal preparation. Next, cone beam computed tomography (CBCT) was performed on extracted teeth before and after preparation, and the measurement sections were located at 0-7.0 mm below the root bifurcation of the mesial root canal at 1 mm intervals. The minimum wall thickness on the mesial and distal aspect of the root canal was measured in each section.@* Results @# ① Prepreparation CT measurements of 20 MFMs showed that the danger zone in the range 0-4 mm under root bifurcation, a mean thickness of 1.18 mm on the mesial aspect of the MB root canal and 1.08 mm on the distal aspect. The mean thickness of the ML root canal was 1.28 mm on the mesial aspect and 1.07 mm on the distal aspect. ② Compared with that of the traditional endodontic access cavity, no significant difference in the decrease of wall thickness was observed in the danger zone of mesial root canal of MFMs in the contracted endodontic access cavity (t = 1.319，P = 0.19). ③ In the mesiobuccal canal, compared with the apical transportation of the traditional endodontic access cavity, which tends to be more mesial side, the apical transportation of contracted endodontic access cavity tends to the distal side. In the mesiolingual canal, both apical transportation groups tended to be on the distal side. @*Conclusion @# When using the One Curve file, compared with traditional endodontic access, the contracted endodontic access cavity based on the minimally invasive concept does not increase the risk that the mesial root canal of mandibular first molars is transported.

Pulpectomía mecanizada en molares primarios: caso clínico / Mechanized pulpectomy in primary molars: a clinical case

Las pulpectomías en molares primarios están indica-das en casos de diagnóstico de pulpitis irreversible o necrosis y reabsorción radicular mínima o nula. Son tratamientos laboriosos y extensos, que sólo pueden ser llevados a cabo en pacientes colaboradores. En búsqueda de simplificar esta terapéutica y mejorar su eficacia, se propone la mecanización de la pre-paración de los conductos de molares primarios. Diversos autores aseguran que esta técnica opti-miza el tiempo clínico y mejora la calidad del trata-miento, obteniendo gran aceptación en la literatura actual. Se presenta la secuencia de procedimientos, resolución y controles de dos tratamientos de pul-pectomía con instrumentación mecanizada en mola-res primarios (AU)

Pulpectomies in primary molars are indicated in cases of irreversible pulpitis or necrosis with mini-mal or no root resorption. They are laborious and ex-tensive treatments, which only can be carried out in cooperative patients. In order to simplify this therapy and improve its effectiveness, the mechanization of root canal preparation is proposed. Several authors assume that this technique optimizes preparation time and improves the quality of treatment, obtaining great acceptance in the current literature. We report the sequence of procedures, resolution, and controls of two pulpectomies with mechanized instrumenta-tion in primary molars (AU)

Influence of traverse and waveone gold glider glide path files on the amount of apically extruded debris / Influência das limas glide path Traverse e Wave One Gold Glider na quantidade de detritos extruídos apicalmente

Objective: The aim of this study was to evaluate the effect of different glide path files on the amount of apically extruded debris. Material and Methods: Sixty single-canaled mandibular premolars were accessed and randomly divided into three groups (n= 20) according to the file used for glid path creation; group A using Traverse file, group B using WaveOne Gold Glider, group C using stainless steel K file. All teeth were then instrumented using the Reciproc system. The debris extruded apically during instrumentation were collected into pre-weighed Eppendorf tubes which were then stored in an incubator at 70 °C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post instrumentation weights of the Eppendorf tubes. The data were analyzed using one-way ANOVA test, and post hoc analysis. Results: WaveOne Gold Glider produced the least amount of apical extruded debris (0.41±0.25) followed by the Traverse group (0.59±0.20) then the K-file group (0.64±0.16) with a statistically significant difference (p=0.003). Conclusion: Apical extrusion of debris is inevitable during root canal cleaning and shaping. Creation of glide path using engine-driven files produces less amount of apically extruded debris compared to hand-driven K-files. (AU)

Objetivos: O objetivo deste estudo foi avaliar o efeito de diferentes limas glide path na quantidade de detritos extruídos apicalmente. Metodologia: Sessenta pré-molares inferiores com canal único foram acessados e divididos aleatoriamente em três grupos (n= 20) de acordo com a lima utilizada para criação do glid path; grupo A usando lima Traverse, grupo B usando WaveOne Gold Glider, grupo C usando lima K de aço inoxidável. Todos os dentes foram então instrumentados usando o sistema reciprocante. Os detritos extruídos apicalmente durante a instrumentação foram coletados em tubos Eppendorf pré-pesados que foram então armazenados em uma incubadora a 70°C por 5 dias. O peso dos detritos secos extruídos foi estabelecido subtraindo-se os pesos dos tubos Eppendorf antes e após instrumentação. Os dados foram analisados por meio do teste one-way ANOVA e análise post-hoc. Resultados: WaveOne Gold Glider produziu a menor quantidade de detritos apicais extruídos (0,41±0,25) seguido pelo grupo Traverse (0,59±0,20) e depois pelo grupo K-file (0,64±0,16) com uma diferença estatisticamente significativa (p=0,003). Conclusão: A extrusão apical de detritos é inevitável durante a limpeza e modelagem do canal radicular. A criação do glide path usando limas acionadas por motores produz menos quantidade de detritos extruídos apicalmente em comparação com as limas K manuais. (AU)

How does nano-focus computed tomography impact the quantification of debris within the root canal system?

Abstract The aim of this study was to compare the quantification of hard-tissue debris by using micro-computed tomography (micro-CT) and nano-focus computed tomography (nano-CT) after root canal instrumentation. Ten mandibular molars containing an isthmus in the mesial root were scanned in a SkyScan 1172 micro-CT device with a voxel size of 12.8 µm and in a NanoTom nano-CT device with 5.5 µm. The mesial root canals were irrigated with 5 mL of saline solution at the orifice level, instrumented with Reciproc R25 files and a second scanning was performed by micro-CT and nano-CT devices for post-instrumentation images. DataViewer software was used for registering the pre- and post-operative micro-CT and nano-CT images. The root canal and the debris were segmented for quantitative analysis of the volume of the canal and volume of debris using CTAn software. Statistical analysis was performed using the T test for comparison between volume of the canal after instrumentation and volume of debris in both image modalities. The level of significance was set at p < 0.05. Nano-CT images showed higher values of debris when compared with micro-CT (p < 0.05) after root canal instrumentation. No difference was observed between the volume of the root canal after instrumentation in the two imaging methods used (p > 0.05). Nano-CT technology can be recommended as a more precise method for quantitative analysis of hard-tissue debris. Moreover, in Endodontic research it is a promising method, as it is capable of providing higher spatial and contrast resolution, faster scanning and higher image quality.

Diamond-coated ultrasonic tip decreases debris and uninstrumented surface after preparation of curved canals with isthmus

Abstract The aim of this study was to evaluate root canal preparation with nickel titanium rotary instruments and complementary preparation with ultrasonic tip in curved canals of mandibular molars with isthmus. Twenty-eight mesial roots of mandibular molars with curvature between 20° and 40° and presence of isthmus throughout the entire extension of the root canals were prepared using ProDesign Logic CM (PDL) up to size 40.05, or HyFlex EDM (HFEDM) up to size 40.04. Complementary preparation was performed in the isthmus region using the ultrasonic insert E18D (Helse, Istmo Diamantada). The root canals were scanned using micro-CT (SkyScan 1176) at 9 µm voxel size before and after each preparation step. Transportation, percentage of increase in volume, debris and uninstrumented surface (UNS) were evaluated. Mann Whitney, Wilcoxon, paired and non-paired t-tests were used for statistical analysis (α = 0.05). The canals prepared with PDL and HFEDM obtained similar results for all the variables assessed before using E18D (p > 0.05). E18D significantly decreased the percentage of debris and UNS values in both Groups (p < 0.05). The complementary preparations with E18D caused a smaller quantity of debris in the isthmus of the canals previously prepared with PDL in comparison with HFEDM (p < 0.05). PDL and HFEDM provided similar root canal preparation. PDL promoted a smaller quantity of Debris in the isthmus than HFEDM after using E18D. E18D significantly improved cleaning, and reduced Debris and UNS.

Impact of access cavities on root canal preparation, restorative protocol quality, and fracture resistance of teeth

Abstract The survival of endodontically treated teeth depends on the remaining tooth structure. The aim of this study was to evaluate the impact of different access cavities on root canal preparation, restorative protocol, and fracture resistance of endodontically treated teeth. Fifty-six mandibular molars were divided into control (n=8) and experimental (n=16) groups according to access cavity: Traditional, Conservative, and Truss; and redistributed (n=8) according to instrumentation protocols: Reciproc Blue and R-motion. After, teeth were scanned in micro-CT and then filled and redistributed according to composite resin restoration (n=8): Filtek One BulkFill and Filtek Z350. A new micro-CT scan was performed to analyze the restorative material. Then, samples were submitted to fracture resistance testing and the failure pattern was determined. Data were analyzed using paired T-test, ANOVA, Tukey, and chi-square tests (α=0.05). In Truss, R-Motion promoted less transportation in different thirds of root canals. Higher percentages of voids (5.05%) and filling material (11.7%) were observed in Truss. Fracture resistance values were higher for the control group, followed by Truss, Conservative, and Traditional. The predominant failure pattern was type-II. In Truss, reciprocating instruments with smaller taper showed less canal transportation. Also, Truss provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material. Thus, in Truss, reciprocating files with smaller taper showed less canal transportation, and these cavities provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material.

Morphological alterations of the apical foramen after foraminal enlargement: a systematic review of ex vivo studies / Alterações morfológicas do forame apical após ampliação foraminal: uma revisão sistemática de estudos ex vivo

Foraminal enlargement has been recommended to optimize the disinfection of infected root canals, although some authors still claim that the foramen should be kept in its original shape and position. This study aimed to evaluate morphological alterations of apical foramen after foraminal enlargement through a systematic review. An electronic search was conducted until April 2022. Ex vivo studies evaluating influence of foraminal enlargement in the morphologic changes of apical foramen were included. Studies without a control group or available full text were excluded. Foraminal deformation and area increase were considered as primary outcomes. Risk-of-bias assessment was performed according to a modified Joanna Briggs Institute's Checklist. From 702 studies retrieved, five were eligible. Most studies used single-rooted teeth, and rotary systems for instrumentation ranging from ­ 2 mm to + 1 mm to the apex. All studies found increased major foramen deformation after foraminal enlargement. Among four studies that evaluated foraminal area, all found increased area after foraminal enlargement. Insufficient data for touched/untouched walls by instruments and dentinal microcrack formation was observed. A low risk of bias was found. Foraminal enlargement during root canal preparation seems to increase deformation and major apical foramen area. Future investigations with standardized methodologies are encouraged (AU)

A ampliação foraminal tem sido recomendada para otimizar a desinfecção de canais radiculares infectados, embora alguns autores ainda afirmem que o forame deve ser mantido em sua forma e posição originais. Este estudo teve como objetivo avaliar alterações morfológicas do forame apical após ampliação foraminal por meio de uma revisão sistemática. Uma busca eletrônica foi realizada até abril de 2022. Foram incluídos estudos ex vivo que avaliaram a influência da ampliação foraminal nas alterações morfológicas do forame apical. Foram excluídos estudos sem grupo controle ou com texto completo indisponível. A deformação foraminal e o aumento da área foram considerados desfechos primários. A avaliação do risco de viés foi realizada de acordo com uma lista de verificação modificada do Instituto Joanna Briggs. Dos 702 registros recuperados, cinco foram elegíveis. A maioria dos estudos utilizou dentes unirradiculares e sistemas rotatórios para instrumentação, com comprimento de trabalho variando de ­ 2 mm a + 1 mm até o ápice. Todos os estudos encontraram aumento da deformação do forame maior após ampliação foraminal. Dos quatro estudos que avaliaram a área foraminal, todos encontraram aumento de área após alargamento foraminal. Foram observados dados insuficientes para paredes tocadas/intocadas pelos instrumentos e formação de microfissuras dentinárias. Um baixo risco de viés foi encontrado. A ampliação foraminal durante o preparo do canal radicular parece aumentar a deformação e a área do forame apical. Futuras investigações com metodologias padronizadas são incentivadas (AU)

Challenges faced by undergraduate dental students during root canal treatment: a survey study / Desafios enfrentados por estudantes de graduação em odontologia durante o tratamento de canal radicular: um estudo de pesquisa

Introduction: root canal treatment is a challenging procedure often first encountered by undergraduate dental students, leading to various difficulties and mistakes. Objective: this study aimed to identify the specific difficulties encountered by undergraduate dental students during root canal treatment and the frequency of mistakes they committed in relation to these difficulties. Material and method: this study employed a cross-sectional survey design. A cohort of 60 third-year students completed a self-administered questionnaire consisting of 27 questions addressing various aspects of endodontic treatment and 11 key areas of root canal procedures. The response options for each question were based on a 4-point Likert scale. Data analysis was performed using Python programming language and heatmaps were created using the seaborn library to better understand the distribution of the data. Result: students encounter challenges in developing tactile sensation, accessory cone placement, and accurately reaching the apex during canal location. Dental schools should focus on improving students' tactile skills and methods to reach the apex to enhance the effectiveness of root canal treatment education. In contrast, students reported fewer mistakes in rubber dam application and safety measures during treatment. Dental educators should emphasize proper instrument use and safety precautions during root canal treatment. Interestingly, students did not perceive these areas as problematic despite committing mistakes. Conclusion: this study provides valuable insights into the challenges and mistakes encountered by undergraduate dental students during root canal treatment. Dental educators should address these issues to improve students' skills and techniques and provide optimal patient care.

Introdução: o tratamento endodôntico é um procedimento desafiador, frequentemente encontrado pela primeira vez por estudantes de odontologia, levando a diversas dificuldades e erros. Objetivo: este estudo teve como objetivo identificar as dificuldades específicas encontradas por estudantes de graduação em Odontologia durante o tratamento endodôntico e a frequência de erros cometidos por eles em relação a essas dificuldades. Material e método: este estudo empregou um desenho de pesquisa transversal. Um grupo de 60 estudantes do terceiro ano respondeu a um questionário autoaplicável composto por 27 perguntas abordando vários aspectos do tratamento endodôntico e 11 áreas-chave dos procedimentos de canal radicular. As opções de resposta para cada questão foram baseadas em uma escala Likert de 4 pontos. A análise dos dados foi realizada utilizando a linguagem de programação Python e mapas de calor foram criados utilizando a biblioteca seaborn para melhor compreender a distribuição dos dados. Resultado: os alunos encontram desafios no desenvolvimento da sensação tátil, na colocação do cone acessório e no alcance preciso do ápice durante a localização do canal. As escolas de odontologia devem se concentrar em melhorar as habilidades táteis e os métodos dos alunos para alcançar o ápice e aumentar a eficácia do ensino sobre tratamento de canal radicular. Em contrapartida, os estudantes relataram menos erros na aplicação do dique de borracha e nas medidas de segurança durante o tratamento. Os educadores odontológicos devem enfatizar o uso adequado dos instrumentos e as precauções de segurança durante o tratamento do canal radicular. Curiosamente, os alunos não consideraram estas áreas problemáticas, apesar de cometerem erros. Conclusão: este estudo fornece informações valiosas sobre os desafios e erros encontrados por estudantes de odontologia durante o tratamento endodôntico. Os educadores odontológicos devem abordar essas questões para melhorar as habilidades e técnicas dos alunos e fornecer o melhor atendimento ao paciente.

Method to determine the root canal spatial geometry using an algorithm of the e-Vol DX CBCT software

Abstract This study evaluated a method to determine the spatial geometry of root canal preparation (RCP) using navigation dynamics and a specific algorithm from a new CBCT software (e-Vol DX). CBCT scans of 168 root canals of mandibular molars were acquired before and after RCP, using nickel-titanium (NiTi) instruments (ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold). The spatial geometry of the root canals and the operative risk of disproportional wear of dentinal walls after RCP were evaluated using a new CBCT software. A 3-point scoring system was used after the measuring of cementum/dentin thickness before and after RCP in all root thirds. The root thirds were distributed into three parts of similar sizes, and the scores were categorized at three levels: 1. mild risk (1/3), 2. moderate risk (2/3), 3. severe risk (3/3). These levels were proposed according to the risk of creating disproportionate shapes, thin walls, or perforations. The data were analyzed statistically by Fischer's exact test (α = 5%). There were no significant differences in operative risk among the NiTi engine-driven systems, for the distal or mesial walls of all the root canal thirds (p>0.05). The spatial geometry method to assess operative risk allows clinical planning for a predictable enlargement of the root canal in all root thirds. Based on using a map-reading strategy on root canals in CBCT scans, NiTi engine-driven instruments did not present an increased operative risk during RCPs.

Resumo Este estudo avaliou um método para determinar a geometria espacial do preparo do canal radicular (PCR) usando uma dinâmica de navegação e um algoritmo específico do software e-Vol DX. Imagens de tomografia computadorizada de feixe cônico (TCFC) de 168 molares inferiores foram adquiridas antes e depois do PCR, usando instrumentos de níquel-titânio (NiTi) (ProTaper Next, BioRace, Reciproc Blue e WaveOne Gold). A geometria espacial dos canais radiculares e o risco operatório de desgaste desproporcional das paredes dentinárias após o preparo foram avaliados usando o software de TCFC e-Vol DX. Um sistema de Score de 3 pontos foi usado após a mensuração da espessura cemento/dentina antes e depois do PCR, em toda extensão dos canais radiculares. Os terços radiculares foram distribuídos em três partes de tamanhos semelhantes, e os Scores foram categorizados em três níveis: 1. risco leve (1/3), 2. risco moderado (2/3), 3. risco severo (3/3). Esses níveis foram propostos de acordo com o risco de criar formas desproporcionais, paredes finas ou perfurações radiculares. Os dados foram analisados estatisticamente pelo teste exato de Fischer ((=5%). Não houve diferenças significativas no risco operatório entre os sistemas de NiTi acionados a motor, para as paredes distal ou mesial em todos os terços do canal radicular (p>0,05). O método de geometria espacial para avaliar o risco operatório permite o planejamento clínico para um alargamento previsível do canal radicular em todos os terços radiculares. Com base no uso de uma estratégia de navegação dinâmica de canais radiculares de molares inferiores analisados em imagens de TCFC, os instrumentos de NiTi acionados estudados não apresentaram um aumento do risco operatório durante o preparo dos canais radiculares.

Cleaning of long oval canals with WaveOne Gold system associated with different irrigant agitation protocols

Aim: The aim of the study was to evaluate the cleaning of mandibular incisors with WaveOne Gold® (WO) under different preparation techniques. Methods: A total of 210 human mandibular incisors were selected and divided into seven groups (n = 30), prepared by WO single-files (Small 20/.07 ­ WOS; Primary 25/.07 ­ WOP; Medium 35/.06 ­ WOM; or Large 45/.05 - WOL) and sequential-file techniques (WOS to WOP; WOS to WOM; and WOS to WOL). Further subdivision was made according to irrigation protocol: control group (manual irrigation - CON), E1 Irrisonic® - EIR, and EDDY® - EDD. Debris removal and the smear layer were evaluated by scanning electron microscopy. Data were analyzed by using Spearman's correlation test. The significance level was set at 5%. Results: For debris and smear layer removal, WOS and WOP, EIR differed from CON and EDD (p <0.05). Conclusion: Regardless of the instrumentation used, the agitation of the irrigant solution provided better cleanability. These findings reinforce the need for agitation techniques as adjuvants in cleaning root canal systems in mandibular incisors

Postoperative pain after endodontic reintervention: a randomized clinical trial

Resumo O objetivo deste ensaio clínico randomizado foi comparar a prevalência e a intensidade da dor pós-operatória em casos de retratamento endodôntico, utilizando instrumentos manuais ou reciprocantes (automatizados). O tempo necessário para desobturação e reinstrumentação do canal radicular também foi avaliado. Quarenta e oito indivíduos possuindo um dente unirradicular tratado endodonticamente e portador de periodontite apical assintomática foram incluídos no estudo. Os pacientes foram aleatoriamente distribuídos em dois grupos (n=24/grupo): retratamento com instrumentos manuais de aço inoxidável ou um sistema reciprocante de níquel-titânio (Reciproc; VDW, Munique, Alemanha). A reintervenção endodôntica foi realizada em duas consultas, sendo aplicada medicação intracanal à base de hidróxido de cálcio por 14 dias, antes da obturação. O tempo clínico gasto com os protocolos de desobturação e reinstrumentação do canal radicular foi registrado com um cronômetro digital. Após cada visita, a intensidade da dor pós-operatória foi avaliada em 12, 24, 48 horas e 7 dias por meio da escala de estimativa numérica (Numerical Rating Scale - NRS). Além do registro da dor, os pacientes foram questionados quanto ao uso de analgésicos. Os dados obtidos foram analisados por testes Qui-quadrado e Mann-Whitney (α=0.05). Não foi detectada diferença significativa entre os grupos quanto à prevalência e intensidade da dor ou uso de analgésicos em nenhum dos períodos avaliados. O tempo clínico foi significativamente menor no grupo reciprocante (18 versus 41 minutos). Pode-se concluir que os instrumentos manuais e reciprocantes foram equivalentes quanto à prevalência e intensidade de dor pós-operatória e uso de analgésicos, mas a desobturação e reinstrumentação do canal radicular foram duas vezes mais rápidas com o sistema reciprocante.

Abstract The present randomized clinical trial compared the prevalence and intensity of postoperative pain in cases of endodontic reintervention using manual or engine-driven reciprocating instruments. As secondary objectives, the analgesic intake and time required for the root canal filling removal and re-instrumentation were also evaluated. Forty-eight individuals with an endodontically treated single-rooted tooth diagnosed with asymptomatic apical periodontitis were included in the study. Patients were randomly assigned to two comparison groups (n=24/group): reintervention with stainless steel manual instruments or a nickel-titanium reciprocating system (Reciproc; VDW, Munich, Germany). The endodontic reintervention was performed in two sessions with a calcium hydroxide-based intracanal medication applied for 14 days before root canal obturation. Working time for the root canal filling removal and re-instrumentation was recorded with a digital stopwatch. After each visit, postoperative pain intensity was assessed at 12, 24, and 48 hours and seven days using the Numerical Rating Scale (NRS). The patients were also asked about analgesic intake. Data were analyzed using Pearson chi-square, T and Mann-Whitney U tests (α=0.05). No significant differences between groups were found regarding the prevalence and intensity of pain or the need for analgesic intake at any time point (P > 0.05). Working time was significantly shorter in the reciprocating group (18 versus 41 minutes). In conclusion, manual and reciprocating instruments achieved the same results in terms of prevalence and intensity of postoperative pain and analgesic intake. However, filling material removal and re-instrumentation of the root canals were more than twice as fast when using the reciprocating system.

Influência da Cinemática de Instrumentação no Preparo do Sistema de Canais Radiculares: uma Revisão Sistemática de Estudos por Microtomografia Computadorizada / Influence of Instrumentation Kinematics on Root Canal System Preparation: a Sytematics Review of Studies by Microcomputed Tomography

The objective of this study was to conduct a systematic review focused on studies that used micro-computed tomography (micro-CT) analysis to evaluate untouched canal areas after root canal preparation with continuous rotary and reciprocating kinematics. Electronic search strategies were used in LILACS, PubMed (MedLine), Science Direct, Cochrane, Scopus and Web of Science databases. An additional search for gray literature was performed on Google Scholar, OpenGrey and ProQuest. In addition, manual searches were performed on the reference list of included articles. It covered studies in English, Portuguese and Spanish, without restriction regarding the publication time. The articles selected for inclusion in this review meet all the following criteria: in vitro studies that evaluated, with the use of micro-CT, the percentage of untouched areas after root canal preparation comparing rotary and reciprocating kinematics. A total of 11 studies were selected for qualitative and quantitative analysis. One study showed that the Reciproc system has a smaller percentage of untouched channel walls in lower incisors when compared to BioRace system. Another study showed no significant differences between reciprocating systems Reciproc and WaveOne with BioRace in mesial root canals of lower molars. Similarly, they did not observe any difference between ProTaper Next and ProTaper Universal with WaveOne. A single study showed differences between XP-Endo Shaper system (rotary) compared with WaveOne Gold. The studies evaluated in the present review showed by micro-CT that none of the instrumentation systems, regardless of the kinematics used or NiTi heat treatment, was able to completely touch the root canal walls.

O objetivo deste estudo foi realizar uma revisão sistemática dos estudos que avaliaram por microtomografia computadorizada (micro - CT) as áreas não tocadas do canal radicular após o preparo com cinemática rotatória continua e reciprocante. Foram utilizadas estratégias eletrônicas de busca nas bases LILACS, PubMed (MedLine), Science Direct, Cochrane, Scopus e Web of Science. Uma busca adicional por literatura cinzenta foi realizada no Google Scholar, OpenGrey e ProQuest. A busca abrangeu estudos em inglês, português e espanhol, sem restrição em relação ao tempo de publicação. Adicionalmente, pesquisas manuais foram realizadas na lista de referências dos artigos incluídos. Os artigos selecionados foram estudos in vitro que avaliaram por micro - CT a porcentagem de áreas não tocadas após o preparo do canal radicular, comparando as cinemáticas rotatórias e reciprocante. No total 11 estudos foram selecionados para análise qualitativa e quantitativa. Um estudo mostrou que o sistema Reciproc (reciprocante) tem uma porcentagem menor de paredes não tocadas do canal em incisivos inferiores, quando comparado com o sistema BioRace (rotatório). Outro estudo não mostrou diferenças significativas entre os sistemas reciprocantes Reciproc e WaveOne e o sistema BioRace em canais radiculares mesiais de molares inferiores. Da mesma forma, não foram observadas diferenças entre ProTaper Next, ProTaper Universal (rotat órios) e WaveOne. Um único estudo apresentou diferenças entre as cinemáticas, XP - Endo Shaper (rotatório) mostrou maior porcentagem de áreas tocadas quando comparado com TRUShape e WaveOne Gold. Os estudos avaliados mostraram que nenhum dos sistemas de instrumentação, independente da cinemática, foi capaz de tocar completamente as paredes dos canais radiculares.